LARKEN CAMTOOL 40/40R

Heavy-duty Precision CNC Router

  • Sign Routing 
  • WoodWorking 
  • Engraving 
  • 3D Modeling 
  • Educational Applications 
  • 4" or  8"  Z axis stroke
  • StarCam Windows Controller
  • 3D Digitizer ready
    		•  Camtool 4040R

    The Camtool 40/40R comes standard with a 2 Hp Bosch Variable Speed Router, with optional 3Hp Elte high frequency spindles

    1 meter x 1 meter cutting area (40" x 40") with a 4" Z axis clearance and 5" Z stroke

    4040 Price List

    All systems come complete and ready to run with Lcam software, 3 axis controller, dust pickup ,hold-down clamps and manual

    Precision Quality Construction

    Precision Thompson Linear bearings are on all axes. These recirculating ball bearings are extremely accurate and rugged. They guarantee very accurate reliable positioning and excellent cut quality. The hardened rails are bolted to the frame all along their length. Heavy gantry is precision machined straight before rails are mounted.

    The table and frame are made of solid aluminum plate and bar that has been precision machined. We don't use hollow aluminum extrusions like other xyz tables.

    The 4040 has 5/8 thompson rail on X and Y axes and 1/2" Thompson on the Z axis.
    Powerful 650 oz/in Pacific Scientific XY stepper motors provide superior speed and cutting power.

    A Profitable Investment

    The possibilities for profit and new products are limited only by your imagination. The Camtool can be used for so many different types of jobs it can pay for itself in a very short time.

     The Camtool can be used to Route, Engrave, 3D mill or plot all types of materials including plastic, acrylic, MDF, wood, composites, brass and aluminium. A 2 hp variable speed Boschrouter is standard with an optional 2 or 3 Hp precision high frequency spindles for heavier cutting. This machine has the power to push a 3Hp to its limit.

    With the 8" or 12" z axis option the 4040-M 'Model Pro' is ideal for making very large 3d molds and models out of modeling materials such as wood foam, plastic etc.

    Perfect for Complex Graphics

    With the Camtool you can easily do complex jobs that you would have previously thought too difficult or time consuming, such as inlaying metal into wood or cutting out elaborate graphic shapes .

    Advanced contouring at cutting speeds up to 200 in/min lets you cut complex graphics with curves and arcs smoothly and accurately. With its computer controlled 4" z axis clearance and 5" stroke , the Camtool can cut thick materials such as wood or foam board using the multi-pass mode. With our StarCam for Windows controller software you can specify maximum depth per pass, whether or not you require a finish pass, cutting speed and finish pass speed.

     The Camtool can engrave tiny letters smaller than .050" or cut signs 40" wide by any length in long sign mode.

    CAMTOOL 4040R Specifications

    XYZ travel .................... 40" x 40" x 5"
    Z Clearance .................. 4" ,8"  or 12"
    Z Travel ...................... Z clearance + 1"
    Table Width .................... 44"
    Table Length ...................54"
    XYZ Resolution ................. 0.0005"
    Repeatability .................. + - 0.001"
    Spindle type ................... 2 Hp Bosch 1617EVS router (std), 2Hp Perske or 3Hp Elte spindles optional
    Maximum cutting speed .......... 200 in/min
    Control type .................. 680 oz/in XY and 150 on Z Micro-Step Stepper motor (5 amp/phase)
    Table Material ................. Aluminum drilled and tapped plate (.375")
    T-Slot option ................. Machined 1/2" x 3" Solid aluminum bar
    Shipping weight ................. 450 Lb
    Power required ................. 120 volt 15 amps (optional 220V 50 Hz)
    Computer required ............... Pentium 200  minimum
     
     

    Camtool 40/40 Options

    Price (US)

    T-Slot Aluminium Table 

    $ 600

    8" or 12" Z axis clearance 

    $ 400,$Call

    2 Hp Perske router with Drive unit  (ER16 collet)  220Volt

    $ 1999

    3 Hp Elte router with Drive unit (ER25 collet)  220Volt

    $ 2199

    Floating 1/4" engraving spindle (1/10 Hp) 

    $ 1400

    Plotter-Pen/Knife holder 

    $ 250

    Vinyl cutting knife w/blade 

    $ 150

    3D digitizer probe attachment

    $ 800 

    Surfer 3d toolpath software 

    $ 600 (with 4040)

    A custom 4040 with four 2HP Perske routers

     It will be used in a production shop making small wood parts 

    A heavyduty Z axis was added to lift the extra weight 

    cnc router woodworking

    | FAQ | Contact Us | About Larken | Distributers | Purchasing Info

    Return to www.LarkenCNC.com

     = 9544th=