xyz wood routers and Software and Accessories
Larken Tutorial and demo YouTube Videos

Tutorial #1 .. Installing Starcnc and StarCam on your PC , Setting up the USB driver and also creating shortcuts

(click fullscreen or Youtube Icon)

 

Tutorial #2 , Introduction to Starcnc and Starcam discussing basic Setup and features

(click fullscreen or Youtube Icon)

Tutorial #3, Connecting USB to controller, basic operation of cnc router table. Setup of Machine Configuration and basic test cut.

(click fullscreen or Youtube Icon)

 

TouchPad setup and demo

(click fullscreen or Youtube Icon)

 
 

Cutting a Strat guitar body on a Larken 24 x 24 x 8 Servo CNC Programmed in Mastercam X4 with all Toolpath operations using a 1/4 inch flat endmill.

(click fullscreen or Youtube Icon)

 
   

PART 1.. Making a hybrid Firebird using a spare neck i had off an old Strat. Cutting a test on foam on a Larken System 60 cnc router with 5.5hp colombo spindle.

(click fullscreen or Youtube Icon)

  

PART 2.. Making a hybrid Firebird using a spare neck i had off an old Strat. Cutting a mahogany on a Larken System 60 cnc router with 5.5hp colombo spindle.

(click fullscreen or Youtube Icon)

 
larken cnc

Made in Canada since 1989

Phone 613 746-5685

Email : Larken@storm.ca